norayr | heh, tried all the hid modules available (hiddev , hid-input or hid-core are not available), but with no luck. :/ | 03:57 |
---|---|---|
norayr | i have updated the kernel, and the system, and i think everything started to be recognized. | 04:47 |
norayr | i just need to create a good xorg.conf now. | 04:47 |
norayr | so yes, it works now. | 05:01 |
freemangordon | SIOCDELRT: No such process | 08:36 |
freemangordon | /etc/maemo-dhcp.d/50_ipv4_network_setup: 93: kill: invalid signal number or name: SIGHUP | 08:36 |
freemangordon | Wizzup: wasn't that fixed? ^^^ | 08:36 |
freemangordon | Wizzup: why is that hardcoded? https://github.com/maemo-leste/libicd-network-ipv4/blob/master/etc/50_ipv4_network_setup#L81 | 09:19 |
freemangordon | if one wants to use a specific dns, then she shall use the UI, no? | 09:19 |
freemangordon | Wizzup: ok, I think more or less everything besides this hardcoded DNS works as it should | 09:45 |
buZz | freemangordon: oooo omg, the dhcp bug of gprs fixed? | 10:01 |
buZz | can i update and test it? :) | 10:01 |
freemangordon | sure | 10:01 |
* buZz checks | 10:01 | |
freemangordon | actually, "please do" :) | 10:01 |
buZz | :D | 10:02 |
dreamer | updating leste, good idea for a sunday morning :) | 10:06 |
* dreamer grabs test-device. does his ~quarterly update and see if everything still works ^_^ | 10:06 | |
freemangordon | buZz: one more gprs DNS fix is on the way | 10:06 |
buZz | omg freemangordon | 10:14 |
buZz | it connects \o/ first try | 10:14 |
buZz | w000000t | 10:14 |
freemangordon | :) | 10:14 |
freemangordon | actually it should auto-connect if set | 10:15 |
freemangordon | the same as in fremantle | 10:15 |
freemangordon | it seems there is some issue with first wlan connection, but that's another story | 10:15 |
buZz | does seem that gprs reception is now max always? | 10:15 |
buZz | unless reception suddenly really is max here | 10:16 |
freemangordon | signal strength was miscalculated | 10:16 |
freemangordon | I fixed the algo | 10:16 |
buZz | i'll keep an eye on it :) | 10:17 |
freemangordon | you can easily verify with 'qmicli --nas-get-signal-strength -d /dev/cdc-wdm0' | 10:17 |
freemangordon | this will give you rssi in dBm | 10:17 |
freemangordon | anything above -74 is excellent, according to what I was able to find over the inet | 10:18 |
freemangordon | if you get values in range of -65 to - 55 or somesuch, then yes, this is 100% signal strenght (5 bars) | 10:18 |
buZz | -47 -48 , it seems | 10:22 |
freemangordon | omg | 10:22 |
freemangordon | are you sitting on top of the cell? | 10:23 |
buZz | i'm googling where the celltower is | 10:23 |
freemangordon | in your basement, it seems :D | 10:23 |
buZz | ~20 houses next to me , there's a tower | 10:24 |
freemangordon | 100m? | 10:25 |
buZz | yeah about | 10:25 |
freemangordon | well, it seems about rigth then, no? | 10:25 |
buZz | i guess? i'll try to find some dead spots on https://antennekaart.nl/kaart/2g and see what reception there is :P | 10:26 |
freemangordon | what I see here is max -70 | 10:26 |
freemangordon | and android shows full bars (or whatever the icon there is) | 10:26 |
buZz | i dont wanna reboot to android :P | 10:27 |
freemangordon | we are little more conservative, so we'll show 3 or 4 bars for -70, but not 5 | 10:27 |
freemangordon | use foil to wrap it | 10:27 |
buZz | hehe yeah i was thinking about that :P | 10:29 |
freemangordon | no, really, that's how I tested different values here | 10:29 |
buZz | :) | 10:29 |
dreamer | urf, test-device has charge below being able to boot :# | 10:32 |
buZz | dreamer: what do you mean? i dont think there's such a charge | 10:33 |
buZz | what do you see when powering up? nothing? | 10:34 |
dreamer | it gets up until the boot menu | 10:34 |
dreamer | I'll just wait some more :) | 10:34 |
buZz | do you have power connected to it? | 10:34 |
dreamer | yes, obviously | 10:34 |
dreamer | N900 chargers ftw | 10:34 |
buZz | just 1200mA? | 10:35 |
buZz | (official n900 one, it seems) | 10:35 |
buZz | still, should be fine | 10:35 |
dreamer | hmhm | 10:36 |
dreamer | w/e, I'll check this afternoon | 10:36 |
buZz | dreamer: action has 2400mA usb charger for under 3 euro, iirc | 10:36 |
buZz | omg what https://wiki.maemo.org/Rockbox | 10:37 |
buZz | oh, its a 'mameo' port :D :D | 10:38 |
buZz | > thomasjfox's rockbox modifications (mameo port) | 10:38 |
dreamer | buZz: yes I have one, and its super noisy remember? | 10:42 |
buZz | noisy? havent experienced that, no | 10:42 |
dreamer | well not the device directly, but the power coming out of it | 10:42 |
buZz | that neither :P | 10:42 |
dreamer | I was powering some light with it and it made the light emit a loud noise | 10:43 |
dreamer | it was not getting clean 5V | 10:43 |
dreamer | they probably omitted some "very expensive" filter caps in there :P | 10:43 |
buZz | didnt i give you a usbdoctor once? | 10:43 |
buZz | to measure | 10:43 |
dreamer | nope, I do have some usb current measurement thingies somewhere | 10:44 |
buZz | ah well, that current cheap action psu charges my d4 and other devices totally fine though , only the eh, data pins seem sometimes weird, but usb condom fixes that | 10:45 |
buZz | freemangordon1: hmmm , opening icd panel without selecting something ; keeps my gprs online, wireguard online, but does pull my jabber offline | 10:47 |
dreamer | I dunno, I'll just try to be patient I guess | 10:47 |
buZz | dreamer: yeah should be bootable in a while anyway with power connected and not booted yet | 10:48 |
buZz | 'worstcase' i usually just connect a li+ charger straight to the battery :P but rarely really needed | 10:48 |
buZz | freemangordon1: also, 'wwan3' stays UP once i switch to wifi , no clue if thats a problem | 10:49 |
buZz | (no ip though) | 10:49 |
freemangordon1 | I guess we shall deactivate the context, lemme check | 10:53 |
buZz | freemangordon1: well, i'm not sure that opening the icd panel should do anything about current active connection? | 10:55 |
buZz | only when selecting a different one or selecting the disconnection | 10:55 |
buZz | imho | 10:55 |
freemangordon | buZz: I am not really sure I understand the issue | 10:55 |
freemangordon | account status is in no way related to connections panel | 10:55 |
buZz | oh , i tap statusbar menu , then 'internet connections' | 10:56 |
buZz | just having that -panel- open closed jabber for me, kept gprs and wireguard active | 10:56 |
freemangordon | I would say this is some coincidence | 10:56 |
buZz | alright :) | 10:56 |
buZz | i'll keep an eye on that aswell | 10:56 |
freemangordon | is it reproducible every time? | 10:56 |
buZz | currently trying something else (building that rockbox repo) i'll retry some more later today | 10:57 |
freemangordon | ok | 10:57 |
buZz | meh, i really feel writing/reading to my microSD gets weirdly slow at times, maybe even hanging | 11:00 |
buZz | but nothing in dmesg about it :( | 11:00 |
freemangordon | buZz: hmm, I see no GPRS iface here after swithing to wlan | 11:02 |
freemangordon | at least ifconfig does not list it | 11:02 |
buZz | in 'ip addr' ? | 11:02 |
freemangordon | wwan3: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000 | 11:03 |
freemangordon | it is DOWN | 11:03 |
freemangordon | I see no issue with that | 11:03 |
buZz | weird, its UP here, still no issue with it though | 11:04 |
freemangordon | yeah, weird | 11:05 |
freemangordon | but it may increase battery usage if up | 11:05 |
freemangordon | maybe check in icd2 logs | 11:06 |
buZz | ha: https://i.imgur.com/wX2FjgV.png , rockbox still has n8xx and n900 as target :D | 11:13 |
* buZz flips a coin over n900 and SDL | 11:13 | |
freemangordon | better use SDL, I guess n900 is for 16bpp | 11:16 |
buZz | goddangit > configure didn't find sdl-config, which indicates that you don't have SDL (properly) installed. | 11:19 |
buZz | its for SDL -1- ??? | 11:19 |
freemangordon | ugh, I broke it :( | 11:19 |
buZz | sdl1 is broken? aw | 11:20 |
freemangordon | no | 11:21 |
freemangordon | ofono plugin :) | 11:21 |
buZz | oh :P | 11:21 |
freemangordon | hmm, no, it seems somehow icd2 went nuts | 11:21 |
freemangordon | i'll investigate, but laters | 11:22 |
freemangordon | now going on a ride, ttyl | 11:22 |
Wizzup | norayr: ok but where do I download them? (the dicts) | 11:28 |
Wizzup | norayr: since mstardict seems to suggest it can download them | 11:28 |
buZz | mstardict has some internal download tool, but doesnt work? | 11:38 |
Wizzup | did you try it? | 11:38 |
Wizzup | It doesn't do anything for me | 11:38 |
buZz | also what does 'real people' mean in the preferences? | 11:38 |
freemangordon | Wizzup: it seems there is at least one more pending issue in ofono plugin | 11:38 |
buZz | yeah, it runs , but does nothing | 11:38 |
buZz | also, it has no icon in menu | 11:38 |
Wizzup | freemangordon: right, I saw your messages, do you want me to take a look? | 11:38 |
buZz | just like the OTR application and eh some others | 11:38 |
freemangordon | if you delay pin entry for too long, gprs connection entry never appears in the dialog | 11:38 |
Wizzup | freemangordon: ah, right, for the search | 11:39 |
freemangordon | Wizzup: I think I fixed everything else but ^^^ | 11:39 |
freemangordon | if you have time, please have a look | 11:39 |
Wizzup | will test | 11:39 |
Wizzup | and check | 11:39 |
Wizzup | very exciting | 11:39 |
freemangordon | I'll look later on otherwise | 11:39 |
freemangordon | bbl | 11:39 |
Wizzup | we need to look into human cloning | 11:39 |
freemangordon | ) | 11:39 |
freemangordon | :) | 11:39 |
buZz | oooo nice Wizzup , is that a maemo application? :D | 11:42 |
buZz | (cloning humans) | 11:42 |
Wizzup | freemangordon: this is great so far | 11:46 |
buZz | yes :D | 11:46 |
Wizzup | I'll do some testing later also to see what happens when signal is lost | 11:46 |
Wizzup | like put it in a fridge | 11:46 |
Wizzup | oh actually no, dns is broken for me | 11:46 |
buZz | this will save me soooo much time, hahaha | 11:46 |
Wizzup | but that could be gconf | 11:46 |
buZz | maybe wipe your gconf iap first? | 11:46 |
Wizzup | right | 11:48 |
buZz | dangit :D http://paste.debian.net/1254250/ | 11:50 |
buZz | hmmm , -Wa,-mimplicit-thumb | 11:50 |
buZz | Error: unrecognized option -mimplicit-thumb | 11:51 |
buZz | hooo kay | 11:51 |
Wizzup | context? | 11:51 |
Wizzup | rockbox? | 11:51 |
buZz | 10:57:16 < buZz> currently trying something else (building that rockbox repo) | 11:51 |
buZz | yeah | 11:52 |
buZz | oo, might be -mimplicit-it=thumb | 11:52 |
buZz | \o/ yez | 11:53 |
buZz | just messing around Wizzup , noticed rockbox was a n900 mediaplayer randomly | 11:54 |
Wizzup | yes, but it doesn't replace openmediaplayer | 11:54 |
buZz | i assume it doesnt | 11:54 |
buZz | i dont think i ever tried openmediaplayer though | 11:54 |
Wizzup | well it's not done | 11:55 |
buZz | {standard input}:1764: Error: shift by register not allowed in thumb mode -- `rsb r0,r0,r0,lsl r3' | 11:56 |
buZz | arf | 11:56 |
buZz | now it assumes all inline asm is thumb | 11:56 |
buZz | -_- | 11:56 |
buZz | dangit | 11:57 |
freemangordon | Wizzup: I'll have a look at the issue | 13:04 |
freemangordon | I know what happens, need to ckeck why | 13:04 |
freemangordon | *check | 13:04 |
buZz | hmmf, gprs disappeared from icd | 13:06 |
freemangordon | yeah, this is the issue ^^^ | 13:06 |
freemangordon | restart icd | 13:06 |
buZz | ah :P | 13:06 |
freemangordon | I'll fix after lunch | 13:07 |
freemangordon | *lunch | 13:07 |
buZz | <3 | 13:07 |
* buZz fills a plate for freemangordon | 13:07 | |
dreamer | hmm, boot got stuck on "Setting up swapspace version .. no label, UUID= .." | 13:09 |
buZz | dreamer: the swap is a zram, shouldnt get stuck? | 13:09 |
dreamer | well yes I assume it shouldn't :) | 13:10 |
buZz | did you make a new SD? or what install is this | 13:10 |
dreamer | I didn't do anything but turn it on | 13:11 |
dreamer | install I already had. from couple months ago I guess? | 13:11 |
buZz | so , a very old install? | 13:11 |
buZz | was it working back then? :D | 13:12 |
dreamer | yes. this worked fine the last time I started it | 13:12 |
buZz | how often have you powercycled and got stuck here now? >1 ? | 13:12 |
dreamer | once | 13:12 |
buZz | try a second time? :D you can force-poweroff by holding voldown & power | 13:12 |
dreamer | https://kielzog.wasted.audio/s/GFtctgw9w6FptNc | 13:12 |
buZz | (for 6 seconds?) | 13:12 |
dreamer | yeah trying that | 13:13 |
buZz | imho, it might be doing a fsck there (on /) | 13:13 |
buZz | but not sure | 13:13 |
dreamer | I think it went past this time .. | 13:14 |
buZz | \o/ | 13:14 |
dreamer | yeah, hildon is supposedly starting .. :) | 13:14 |
dreamer | oops, no. it rebooted .. | 13:14 |
buZz | reboot how? with 'white led' on below display? | 13:15 |
dreamer | no it just turned off and back to motorola logo | 13:15 |
dreamer | probably empty again .. | 13:15 |
buZz | oh well, just try again :P | 13:15 |
buZz | 'empty' would show white led | 13:15 |
buZz | at least, if maemoleste sees 'batt voltage too low' it will shutdown , with white led -on- during shutdown | 13:15 |
dreamer | well it's booting again | 13:16 |
buZz | :) | 13:16 |
dreamer | now starting hildon and black screen .. | 13:16 |
buZz | dreamer: i think its not so useful to debug a months-old install ;) | 13:16 |
dreamer | ok and _now_ it actually started hildon | 13:16 |
buZz | but just needs enough for apt update etc | 13:16 |
buZz | :) | 13:16 |
dreamer | aaand it restarted by itself again | 13:17 |
buZz | are you sure your battery is connected well? | 13:18 |
dreamer | I guess I'll leave it on the charger for some more hours | 13:19 |
dreamer | the screws couldn't be any tighter ;) | 13:19 |
dreamer | (without not being able to unscrew them again) | 13:19 |
buZz | they shouldnt be very tight, or they will destroy the flexpcb | 13:19 |
dreamer | I mean it can't NOT be attached | 13:19 |
buZz | in /sys/class/power/something you can cat uevent and see batt voltage etc | 13:20 |
dreamer | that assumes that it's booted | 13:20 |
dreamer | I'll just wait until tomorrow and try again | 13:20 |
buZz | :) honestly, i'd just install latest fresh d4 image from the buildrepo | 13:22 |
buZz | i dont think you have any user data on it? | 13:22 |
dreamer | honestly I think the battery just is completely empty | 13:22 |
* dreamer not going to bother with this today | 13:23 | |
buZz | i have never seen 'random reboot' from a empty battery | 13:28 |
dreamer | likely because it's attached to the power | 13:31 |
dreamer | so it's low enough that the device stops, but then starts again because there is power applied | 13:32 |
norayr | so, kernel people: i updated droid4 kernel, the version is the same, but external devices started to show up in lsusb, and everything worked magically! | 13:39 |
norayr | don't know what was wrong with the previous kernel, it would be great if you know this. | 13:39 |
norayr | Wizzup, freemangordon, uvos. | 13:39 |
norayr | and i am using hildon with lapdock now and my xorg.conf - very cool. | 13:40 |
buZz | updated to what? | 13:40 |
norayr | i updated the kernel, and lsusb started to see more devices. | 13:40 |
buZz | updated to what? | 13:40 |
norayr | version was the same. | 13:40 |
buZz | do you have a diff of the .config of your kernel build vs the stock /proc/config.gz ? | 13:41 |
norayr | unfortunately no... i didn't think it'll help. | 13:41 |
buZz | right, so no clue what you did then | 13:41 |
norayr | but you know write? which changes you did. and the version is the same. | 13:41 |
buZz | i dont think this helps anything :P | 13:41 |
norayr | s/write/right | 13:41 |
norayr | do i have a previous config.gz in /boot kept back by dpkg? | 13:42 |
buZz | likely not | 13:42 |
buZz | i'll hookup some HID device to my d4 and see what dmesg says | 13:43 |
norayr | i'll tell you the version in a minute, but the version did not change, i was wondering why. | 13:43 |
buZz | could you please put your -current- /proc/config.gz (decompressed) on a pastebin? | 13:43 |
norayr | yes | 13:43 |
norayr | in a minute | 13:43 |
buZz | \o | 13:43 |
buZz | i plug in a yubikey, maemo instantly sees a HID device | 13:46 |
buZz | ¯\_(ツ)_/¯ | 13:46 |
buZz | https://space.nurdspace.nl/~buzz/2022-09-18-134618_960x540_scrot.png <-- | 13:47 |
norayr | yes but your kernel is latest stable probably | 13:50 |
norayr | http://dpaste.com/74V8QJY47 | 13:51 |
norayr | this is current config with which it works. | 13:51 |
norayr | let me see in the apt log if i can see something about version | 13:51 |
buZz | i run -devel | 13:52 |
buZz | should be exact same kernel | 13:52 |
buZz | afaik | 13:52 |
buZz | dpkg -l | grep kernel | 13:52 |
buZz | eh , grep image | 13:52 |
buZz | 5.18.19-1+2m7.1 on mine | 13:53 |
buZz | and indeed, i do install updates 'all the time' | 13:53 |
norayr | 5.18.19-1+2m7.1 | 13:58 |
norayr | hm, am i on devel too then? | 13:59 |
norayr | let me check | 13:59 |
buZz | 13:52:38 < buZz> should be exact same kernel | 13:59 |
norayr | yes, both repos are there, with devel and without. | 13:59 |
norayr | i'll try to lok into apt log | 13:59 |
buZz | sounds like you broke something on your installation then | 14:00 |
norayr | apt log says linux-image-omap:armhf (5.18.19-1+2m7, 5.18.19-1+2m7.1) | 14:00 |
buZz | as hid is already working without any mods | 14:00 |
norayr | so i updated 5.18.19-1+2m7 to 2m7.1 | 14:00 |
norayr | and it fixed everything. | 14:00 |
buZz | oh, you didnt update | 14:00 |
buZz | why not? | 14:00 |
norayr | no? | 14:00 |
norayr | you mean why didn't i update for some long time? | 14:01 |
buZz | yes | 14:01 |
norayr | i don't know. | 14:01 |
norayr | but do you imagine what could be wrong in that kernel? | 14:01 |
norayr | honestly if i updated it'd save me two sleepless nights. | 14:01 |
buZz | from the lack of things you saved? no | 14:01 |
norayr | but i found two kernel versions, what was, and what it became. | 14:02 |
norayr | isn't it in git? | 14:02 |
buZz | sure, but why bother with that? | 14:02 |
buZz | why do you want to debug what we dont use | 14:02 |
norayr | i am just afraid that it'll be broken one day again. | 14:02 |
norayr | because nobody except me seems to use the lapdock for now. | 14:03 |
buZz | how do you know it wasnt something you broke before? | 14:03 |
buZz | i have a lapdock , worked since ages | 14:03 |
buZz | and i use usb otg for stuff often too | 14:03 |
norayr | okay, that is very good to know, that i am not alone. | 14:03 |
buZz | well, you are in that you were having issues, and not installing updates regularly :P | 14:04 |
buZz | am i mistaking that you arent using hildon either? | 14:04 |
norayr | how could i break it? i only used apt with maemo and devuan repos. i don't build on this device. i build on pinephone or in vm. | 14:04 |
norayr | no no, with the same config hildon didn't work with that kernel and started working with this kernel. | 14:05 |
norayr | with the same xorg.conf. | 14:05 |
norayr | and lsusb as well. | 14:05 |
norayr | well, hildon worked - graphics worked, but not kbd and mouse. | 14:05 |
norayr | i posted here a picture of hildon working on a lapdock, but i still had problems with mouse and keyboard. | 14:06 |
norayr | after kernel update they started to be recognized. | 14:06 |
buZz | norayr: so , really sounds like your install was broken | 14:06 |
norayr | okay, i don't want to insist, but i don't understand - i just had not recent kernel - is that a definition of broken? | 14:06 |
buZz | you said usb wasnt working | 14:07 |
buZz | 14:05:48 < norayr> well, hildon worked - graphics worked, but not kbd and mouse. | 14:07 |
norayr | yes! | 14:07 |
norayr | that's what i am saying - usb didn't work with that kernel. | 14:07 |
buZz | i havent had 'usb not working' on any updates since my first leste install | 14:07 |
freemangordon | Wizzup: is there any way on d4 to have USB networking stable? | 14:07 |
freemangordon | when battery is charged that is | 14:07 |
buZz | does anyone know if https://maedevu.maemo.org/leste/ is maybe very old? | 14:08 |
norayr | buzz, okay. let's hope it'll continue to work. | 14:08 |
buZz | norayr: likely, it wasnt broken for me before :P | 14:08 |
freemangordon | buZz: it is not, browse into dirs and you will see | 14:09 |
norayr | i think my reaction would be to see what was the config, and making sure nothing was accidentally removed from the config of the kernel i upgraded from. | 14:09 |
buZz | freemangordon: where could i find the linux-image-omap ? | 14:09 |
norayr | Wizzup, on mstardict, i don't remember if i ever used that 'download' button on fremantle. | 14:09 |
norayr | but i noticed here it doesn't do anything. | 14:10 |
buZz | norayr: sure, you could downgrade the kernel back , and then compare | 14:10 |
norayr | i always used dictionaries i scp from my desktop. | 14:10 |
norayr | buzz oh i can? | 14:10 |
buZz | norayr: just /usr/share/dict files? | 14:10 |
norayr | yes, for me i was scp-ing ~/.stardict/dic to ~/MyDocs/mstardict/ | 14:10 |
norayr | and now it works for me as well. | 14:10 |
norayr | but i need to see in the code what does that button do | 14:10 |
buZz | so not /usr/share/dict files? | 14:10 |
buZz | ah MStarDict is loading StarDict DICT files and Wyabdc RealPeople TTS sounds from MyDocs/mstardict/ directory. | 14:11 |
norayr | maybe it calls the default browser, or maemo-browser, that's why it doesn't do anything. | 14:11 |
buZz | default browser is usually qtwebbrowser | 14:11 |
buZz | on leste | 14:11 |
norayr | it's the same just /usr/share files can be installed with apt, and with root, and stardict also looks in to ~/.stardict/dic. | 14:11 |
buZz | (which is quite a sad browser) | 14:11 |
norayr | mstardict looks into ~/MyDocs/mstardict, don't even know if it looks into /usr | 14:11 |
buZz | http://sourceforge.net/projects/stardict-4/files/WyabdcRealPeopleTTS/WyabdcRealPeopleTTS.tar.bz2/download | 14:12 |
buZz | http://sourceforge.net/projects/stardict-4/files/WyabdcRealPeopleTTS/OtdRealPeopleTTS.tar.bz2/download | 14:12 |
freemangordon | buZz: hmm, maybe you are right, I am not really sure where we host ATM | 14:12 |
buZz | welp, download links are here ; http://www.huzheng.org/stardict/ | 14:12 |
buZz | what a mess | 14:12 |
buZz | maybe it'll be good to package up those TTS and dictionaries | 14:13 |
buZz | holy, wtf | 14:14 |
buZz | its 6.4GB of dictionaries O_o | 14:14 |
buZz | ANNNNd no 'single dictionary' download, -great- | 14:15 |
buZz | annnnnnd the baidu link doesnt work | 14:18 |
norayr | yes, maybe. not even sure the license is ok. i can package dicts i use. | 14:18 |
norayr | but those are mostly armenian related. | 14:18 |
buZz | so, dictionaries cant be downloaded really | 14:18 |
norayr | and i also have many projects where i let's say parse the pdf, create tab separated file from it (or babylon file), then compile with stardict_tabfile or stardict_babylon, and then use. | 14:19 |
norayr | or the other project is i hacked the old windows only dictionary with unknown to be db format, i just parsed the binary file, taken out the the data, created tab separated file, compiled it. | 14:20 |
buZz | ooo they're on sourceforge aswell | 14:20 |
buZz | great | 14:20 |
buZz | thanks 'huzheng' | 14:20 |
buZz | :D | 14:20 |
norayr | and there was 8bit armenian encoding, i converted it to unicode, and during parse i also noticed some errors, like latin 'o' instead of armenian 'o' in a word, because of which that word didn't work back then on windows, but works now across devices. | 14:21 |
buZz | they are here; https://sourceforge.net/projects/huzheng/files/stardict-dic/ | 14:21 |
buZz | superannoyingly linked by huzheng | 14:21 |
norayr | there are also dictionary dumps from wiktionary. | 14:21 |
norayr | in stardict format. | 14:21 |
buZz | (evidenced by 0 downloads per week) | 14:21 |
norayr | people use google translate nowadays. | 14:22 |
norayr | but i use offline dictionaries. | 14:22 |
buZz | yeah just a bit annoying how html0.1 design this all is :P | 14:22 |
buZz | with about 2000 times his name in them | 14:22 |
* norayr needs to take a look at the sourcecode. | 14:37 | |
buZz | downloading from sourceforge is 300KB/s , lol | 14:42 |
buZz | i'll throw em on space.nurdspace.nl/~buzz/somewhere once i'm done | 14:42 |
buZz | -untarred- so you dont need to redownload the full 7GB for just 1 dictionary | 14:43 |
* buZz hates huzheng | 14:43 | |
freemangordon | Wizzup: I think most (if not all) of the issues in ofono plugin are fixed | 16:35 |
freemangordon | it only needs some UI integration (roaming and password dialogs) | 16:36 |
freemangordon | I'll do that later on | 16:36 |
Wizzup | cool | 17:01 |
Wizzup | you might run into connui-cellular then | 17:01 |
buZz | well, SMS notification would be nice too, or missed calls, etc | 17:11 |
buZz | received a SMS the other day, no notification or sound, only noticed today in 'osso-abook' under 'recent' | 17:11 |
buZz | i guess not technically ofono? | 17:12 |
Wizzup | yes, it is conversations. | 17:15 |
buZz | ah | 17:24 |
freemangordon | Wizzup: heh. but yeah, this shall be fixed | 18:31 |
tmlind | freemangordon: so did adding the notifiers for CIEV and WAKEUP help? :) | 18:32 |
freemangordon | hard to say, as I said I didn;t know what bug I fixed :D | 18:32 |
freemangordon | but Wizzup said he'll test and provide feedback | 18:33 |
tmlind | ok let's wait for that then | 18:33 |
tmlind | a fix for speculative bug | 18:33 |
freemangordon | he said he has to send SMS-es twice a day for context to activate (or appear, can;t recall) | 18:34 |
freemangordon | tmlind: you don;t use leste(hildon), do you? | 18:35 |
freemangordon | uvos: BTW there is a bug I guess in mce - after charger is disconnected, display gets dimmet every 2-3 seconds | 18:37 |
freemangordon | *dimmed | 18:37 |
tmlind | freemangordon: i have a d4 test device with m-l that i carry in my bag, have not updated it for few weeks now though | 18:37 |
freemangordon | tmlind: please do, lots of things improve vastly in terms of gprs/ofono | 18:37 |
tmlind | but yeah i'm still currently stuck with shell scripts for sms and phone calls on my alpine phone.. | 18:37 |
tmlind | ok yeah i'll update | 18:38 |
freemangordon | with todays fixes gprs connection should be stable most of the time (if not all) | 18:38 |
tmlind | cool, are the signing key update instructions up somewhere now? | 18:38 |
freemangordon | I think we imported it in our repo, so nothing you shall do | 18:39 |
freemangordon | Wizzup: ^^^? | 18:39 |
freemangordon | uvos: clicking on the display undims it, and it gets re-dimmed in 2-3 seconds and so on | 18:39 |
freemangordon | the only way to fix that is to lock-unlock | 18:40 |
tmlind | ok i'll try dist-upgrade, need to charge the battery a bit first | 18:40 |
freemangordon | Wizzup: before jumping on connui-cellular I would like to add ofono UI dialogs | 18:41 |
freemangordon | tmlind: any idea how long usually it takes for someone to react on ofono ML? | 18:42 |
tmlind | should be only few days | 18:43 |
freemangordon | ok | 18:43 |
freemangordon | ugh: | 18:50 |
freemangordon | POWER_SUPPLY_CHARGE_FULL=253404 | 18:50 |
Wizzup | freemangordon: tmlind: I think adding the notifers helped, I haven't run into it not working yet | 19:07 |
Wizzup | freemangordon: does it also act on the context disappearing / going inactive, btw? | 19:07 |
Wizzup | (as in, the icd plugin I mean) | 19:07 |
freemangordon | yes, including SIM removed/hot-plugged | 19:10 |
Wizzup | hm, ok | 19:10 |
Wizzup | I had some issues where I could not reach hosts but it still said it was active | 19:11 |
freemangordon | well, it could be ofono or the modem itself | 19:13 |
freemangordon | if you can repro, then we can investigaate | 19:13 |
Wizzup | mhm | 19:14 |
tmlind | Wizzup: ok good to hear no issues so far | 19:22 |
tmlind | yup it's getting there for sure | 19:41 |
dsc_ | '/win 75 | 19:42 |
dsc_ | whoops | 19:42 |
uvos | buZz: sphone should (and dose for me) ring on sms and show a notification | 21:01 |
buZz | i'd like a 'unread msgs' number in view somewhere :P | 21:01 |
uvos | freemangordon: impossible, mce dosent even know that the charger is connected | 21:01 |
uvos | (so maybe theres a bug but it cant really be related to the charger) | 21:02 |
Wizzup | buZz: conversations will handle this | 21:03 |
uvos | btw sphone also dose this, its just in a systray applet you cant see | 21:04 |
buZz | ah, maybe a 'statusmenu item' thats systray exists for maemo? | 21:08 |
buZz | hehe https://bugs.maemo.org/show_bug.cgi?id=4942 | 21:09 |
Wizzup | no, we just need to use libnotify | 21:40 |
* Wizzup bbl | 21:40 | |
sicelo | Wizzup: seems wiki is down, at least for me | 22:17 |
Wizzup | sicelo: ok now? | 22:25 |
freemangordon | uvos__: what about "display stay lit while charging" setting? | 22:27 |
sicelo | yes it opens now | 22:31 |
Generated by irclog2html.py 2.17.0 by Marius Gedminas - find it at https://mg.pov.lt/irclog2html/!